I changed the brake pads a 1990 toyota camry but there is something wrong?

they needed replacing, so did that..before you only had to touch the brake pedal and it stopped, now the new oads are on you have to push to the floor to brake, whats wrong? Its like it is loose or something? Did this be normal for new pads and why do is the pedal feeling loose when you want to break? thanks any help would be greatly appreciated
I changed the brake pads a 1990 toyota camry but there is something wrong?
did you bleed the brakes?, you have to bleed them if you opened up the bleeders when you changed the pads and if you have drum brakes on the back you need to adjust them up by hand with the gear wheel so they ride against the drum some.
I changed the brake pads a 1990 toyota camry but there is something wrong?
you have to bleed your brakes
You must have open the bleeder vales. You have to bleed the system for the brake to work properly again.
You may have air in your brake lines or didn't bleed them when you replaced the pads. Try mashing the pedal to the floor over and over again a few dozen times. If it doesn't firm up then you need to bleed the brake lines.