Changing brake pads on a 2005 expedition?

1. jack up the vehicle.



2. use jack stands to support the vehicle.



3. remove the wheels.



4. remove the brake caliper one side at a time.



5. remove the brake rotor and have it machined.



6. push in the caliper piston evenly and check the brake fluid.



7. reassemble with new pads and get into the vehicle and pump up the brakes slowly until the pedal is firm.



8. do the same for the other side.



9. recheck everything.



10. road-test the vehicle slowly and apply the brakes about 30 times no faster than 20 mph so that the pads will set in.