I have a 2000 Honda Accord, and I need to have my brake pads changed. I am thinking about doing it myself, but I was wondering, are asbestos brake pads still used today in the US? Is there a chance that the brake pads on my Honda contain asbestos? I want to be careful with it and take precautions. Thanks.
Asbestos Brake Pads Used today in US?
I think Asbestos was banned a long time ago.
Asbestos Brake Pads Used today in US?
Could have but most people affected by asbestos were in the manufacturing of it are installed it or exposed to it daily in an enclose environment.
You will not be harmed by repairing the brakes on your car.
This was for people that were exposed to it on a daily basis, and that did not wear protective clothing and gear.
For a simple brake pad swap, there is nothing to worry about.
Get the ceramic pads, they contain no asbestos
This car came with organic pads, You should move up to carbon pads if availiable, you are safe.
I hope you are proficient at this,if not you could damage your brakes or a person(s). Special tools may be required also.
Advice you check out a service manual or copy the brake pad R/R at your local Library.
Good Luck
You'll be fine to change the breaks on your own. Please read how first it's not as easy as you think. They are probably going to stick and you'll have a heck of a time getting them off make sure you have the right tools, I use a clamp %26quot;c%26quot; to get them unstuck. Be careful, and there isn't asbestos in them if there was there isnt a harmful amount anyway..
Asbestos was banned over 30 years ago for any use. No modern brake pads use it. They are usually Kevlar, some metal copper, aluminum and thermo set rubber.
I don't know that your particular car has asbestos pads, but most of the cheaper brands use asbestos and some of the others are a mixture. Take for example the brand raybestos so if you want to be careful use a solvent like brake parts cleaner to clear the brake dust from your work area or some water first to clear it out then the solvent. You can buy organic pads but they are more expensive. The asbestos pads won't harm you as long as you don't get the dust airborn, like for exaple being in a closed space and blowing it off with compressed air.
Most brake pads made contain asbestos; even to this day they still use it.
Friday, 7 October 2011
Does anyone have step by step directions on how to change brake pads on a 02 Altima?
i own a repair shop,and all you do is jack it up,and take off the wheel,then take off the caliper bolts that hold it on ,then remove it, the pads will come off it now ,loosen the bleeder screw a little and lightly press the caliper back in towards the caliper ,not to fast on this,some fluid will come out of the bleeder when you do this,then place the new pads in place and install the caliper back on it,be sure and tighten all the bolts up good,re tighten the bleeder screw and put the wheel back on ,and that's it,don't get in the car and hit the brakes hard the first time ,do it slowly and they will go down,do it again slowly,and you,ll feel them go down some ,the last time you can press them normal they should be alright,good luck i hope this help,s
Does anyone have step by step directions on how to change brake pads on a 02 Altima?
Well, they are all pretty similar. But if you would prefer the step by step guide, to your local auto zone, and pick up a Chilton manual, usually around $15. If you would like the simple explanation, email me and I will describe it.
Does anyone have step by step directions on how to change brake pads on a 02 Altima?
dodgeman forgot to bleed the brakes- if you do what he suggests, you will have a spongy brake pedal! The way to replace the pads depends on whether it's front or rear brakes- Front's are easier, rear's require special tools, I suggest a shop to do those...black hair clear nail polish
Does anyone have step by step directions on how to change brake pads on a 02 Altima?
Well, they are all pretty similar. But if you would prefer the step by step guide, to your local auto zone, and pick up a Chilton manual, usually around $15. If you would like the simple explanation, email me and I will describe it.
Does anyone have step by step directions on how to change brake pads on a 02 Altima?
dodgeman forgot to bleed the brakes- if you do what he suggests, you will have a spongy brake pedal! The way to replace the pads depends on whether it's front or rear brakes- Front's are easier, rear's require special tools, I suggest a shop to do those...
I just had new brake pads put on, rotors getting very hot now. Is this common after initially changing them?
Since I had new brake pads put on front of car, rotors been getting very hot. I was wondering if this may be common, until finish on new pads wear down a little or if problem from them not installing pads or calipers back on correctly. I'm worried may cause damge to rotors them getting so hot, so quickly.
I just had new brake pads put on, rotors getting very hot now. Is this common after initially changing them?
rotors will always be hot especialy when they are new. the brake pads naturally drag lightly on the rotors even when you are not applying the brakes, so there will be friction heat. try jacking the vehicle up so the wheel in question is off the ground, try spinning the wheel by hand, if it moves with a slight drag, this is normal, if it is hard to turn, you may need work on the cylinder, it may not be alllowing the pad to adequately return to it's proper position.
I just had new brake pads put on, rotors getting very hot now. Is this common after initially changing them?
The rotors must be below spec, they are designed to absorb heat but thats if they can absorb it. New pads on thin rotors is a bad combinations. Have the rotors measured for their thickness and if they are below spec, change them both.
It is hard to tell what you mean by %26quot;hot%26quot; over the internet, take it back and have them checked to be safe. Overheating will cause them to warp.
if rotors were not resurfaced they will run hotter
I just had new brake pads put on, rotors getting very hot now. Is this common after initially changing them?
rotors will always be hot especialy when they are new. the brake pads naturally drag lightly on the rotors even when you are not applying the brakes, so there will be friction heat. try jacking the vehicle up so the wheel in question is off the ground, try spinning the wheel by hand, if it moves with a slight drag, this is normal, if it is hard to turn, you may need work on the cylinder, it may not be alllowing the pad to adequately return to it's proper position.
I just had new brake pads put on, rotors getting very hot now. Is this common after initially changing them?
The rotors must be below spec, they are designed to absorb heat but thats if they can absorb it. New pads on thin rotors is a bad combinations. Have the rotors measured for their thickness and if they are below spec, change them both.
It is hard to tell what you mean by %26quot;hot%26quot; over the internet, take it back and have them checked to be safe. Overheating will cause them to warp.
if rotors were not resurfaced they will run hotter
How much does it cost to change your brake pads and rotors?
I just went for my NY inspection. They wanted to charge me $ 600.00 to change my brake and rotors. I drive a 2003 ford explorer. Does that seem about right?
How much does it cost to change your brake pads and rotors?
Who's %26quot;they%26quot;? According to fordparts.com, front brake pads for your 2003 Explorer cost $97.49US (part number 4L2Z-2001-BA), and front brake rotors cost $89.67US each (part number 4L2Z-1125-AA). So, if we do the math here, that's $276.83US in parts alone. Since you mention NY, I'm assuming that labour rates in that area go for around $100.00US per hour. Typically, most dealers pay their techs 1.5 hours to replace front brake pads and brake rotors. That means at $150.00US plus $276.83US works out to about $426.83US plus taxes. That doesn't sound too far off from the $600 you were quoted if you add the taxes in. Hope this helps.
How much does it cost to change your brake pads and rotors?
Wow umm rotors(sport ones) are about$250 for a 2003 Ford Explorer. And pads are about $85. that is an insane amount to charge for that simple of a job. i would buy the parts and find a friend that is somwhat mechicaly talanted. its so easy. im 16 and i can do it.
I think that's right...because i believe you have 4 rotors! rear and front. I just paid $320 to change my rotors and that was all just on parts and i only have 2 rotors. So i believe that's around the price. Look up the price of your rotors %26amp; Brake pads like on autozone.com and add the price for the repair which is like $50 something dollers per hr. which should only be an hr maybe 1 1/2 hours tops!
you can do it your self three or four times for that price ... front pads 25 bucks rear about the same rotors vary.. call any auto parts store and get a price for parts and you wil see.. most of the time a brake job just for pads start about 100 bucks which is high knowing what i know i do it all my self maybe a couple hundred but it sounds high .. call a few places ..... ask how much to replace it alll pads and rotors front and back....which hardy ever needed now if you dont need rotors which most of the time you dont unless you have wore them out or they been grinding.. you can look the price up autozone.com
Rip off! If you can find someone to do the brakes and rotors for you do it. auto zone has the best price for those type of parts. Only paid $130.00 for brakes and rotors there and $80.00 for labor for the person to do it.
How much does it cost to change your brake pads and rotors?
Who's %26quot;they%26quot;? According to fordparts.com, front brake pads for your 2003 Explorer cost $97.49US (part number 4L2Z-2001-BA), and front brake rotors cost $89.67US each (part number 4L2Z-1125-AA). So, if we do the math here, that's $276.83US in parts alone. Since you mention NY, I'm assuming that labour rates in that area go for around $100.00US per hour. Typically, most dealers pay their techs 1.5 hours to replace front brake pads and brake rotors. That means at $150.00US plus $276.83US works out to about $426.83US plus taxes. That doesn't sound too far off from the $600 you were quoted if you add the taxes in. Hope this helps.
How much does it cost to change your brake pads and rotors?
Wow umm rotors(sport ones) are about$250 for a 2003 Ford Explorer. And pads are about $85. that is an insane amount to charge for that simple of a job. i would buy the parts and find a friend that is somwhat mechicaly talanted. its so easy. im 16 and i can do it.
I think that's right...because i believe you have 4 rotors! rear and front. I just paid $320 to change my rotors and that was all just on parts and i only have 2 rotors. So i believe that's around the price. Look up the price of your rotors %26amp; Brake pads like on autozone.com and add the price for the repair which is like $50 something dollers per hr. which should only be an hr maybe 1 1/2 hours tops!
you can do it your self three or four times for that price ... front pads 25 bucks rear about the same rotors vary.. call any auto parts store and get a price for parts and you wil see.. most of the time a brake job just for pads start about 100 bucks which is high knowing what i know i do it all my self maybe a couple hundred but it sounds high .. call a few places ..... ask how much to replace it alll pads and rotors front and back....which hardy ever needed now if you dont need rotors which most of the time you dont unless you have wore them out or they been grinding.. you can look the price up autozone.com
Rip off! If you can find someone to do the brakes and rotors for you do it. auto zone has the best price for those type of parts. Only paid $130.00 for brakes and rotors there and $80.00 for labor for the person to do it.
How do I change brake pads for a 2003 ford focus?
When should I get my brake pads changed?
I drive a 2000 Ford Focus LX.
There is no screeching but definitely some vibration and different feel when I apply the brakes. I had about 30% left on my pads when I got my car serviced in October.
I don't drive very much at all. When should I get them replaced? I was hoping to wait until mid April as I am trying to save money for a vacation in 2 weeks.
When should I get my brake pads changed?
People have a bad habit of looking at a few pads and coming to a decision. Most of the time one or two pads will be a lot more worn than the rest and they're usually on the inside where they're hard to see.
What you're feeling is probably metal on metal because one pad is gone altogether.
When should I get my brake pads changed?
If its not screeching yet and you dont drive that often it should be ok till mid April.
Well i would do it as soon as you can. You can take you wheel off and look at how much is left on the pad.
But don't let them get close. It will end up costing you a heckuva lot more money if you let the pads/shoes grind up the rotor.
Brakes generally last 30 to 50K miles. You can probably wait til after vacation to fix it.
My guess is that yes, you can wait.... This of course is pending that you spend 9.99 at your nearest shop to have the brake lining thickness checked. by the way it should not be measured as a percentage but actually in decimal or 32,s, more on that later.
The vibration is mechanically called pulsation. Usually manifested as a shuddering in the steering wheel at higher speeds or a jerkiness at slower speeds. This is caused by the brake drum or rotor warpage from heat and wear and tear..
Anything above 2/32 is acceptable.
Remember that some cars still have wear sensors. you can ask the service tech to check if yours have this feature which will create a chirping or sqeaking sound as your linings approach the service limit.
There is no screeching but definitely some vibration and different feel when I apply the brakes. I had about 30% left on my pads when I got my car serviced in October.
I don't drive very much at all. When should I get them replaced? I was hoping to wait until mid April as I am trying to save money for a vacation in 2 weeks.
When should I get my brake pads changed?
People have a bad habit of looking at a few pads and coming to a decision. Most of the time one or two pads will be a lot more worn than the rest and they're usually on the inside where they're hard to see.
What you're feeling is probably metal on metal because one pad is gone altogether.
When should I get my brake pads changed?
If its not screeching yet and you dont drive that often it should be ok till mid April.
Well i would do it as soon as you can. You can take you wheel off and look at how much is left on the pad.
But don't let them get close. It will end up costing you a heckuva lot more money if you let the pads/shoes grind up the rotor.
Brakes generally last 30 to 50K miles. You can probably wait til after vacation to fix it.
My guess is that yes, you can wait.... This of course is pending that you spend 9.99 at your nearest shop to have the brake lining thickness checked. by the way it should not be measured as a percentage but actually in decimal or 32,s, more on that later.
The vibration is mechanically called pulsation. Usually manifested as a shuddering in the steering wheel at higher speeds or a jerkiness at slower speeds. This is caused by the brake drum or rotor warpage from heat and wear and tear..
Anything above 2/32 is acceptable.
Remember that some cars still have wear sensors. you can ask the service tech to check if yours have this feature which will create a chirping or sqeaking sound as your linings approach the service limit.
How much is it to get brake pads changed?
300-600 depending on your vehicle.
Its a small price to pay to help avoid an accident.
How much is it to get brake pads changed?
it depends, brake pads are usually cheap and labor is probably worth the same if not much...its cheap just go do it
How much is it to get brake pads changed?
Most places charge around 100 per axle. I recommend you ask a friend or family member. Pads cost around 25.00 a pair and they are easy to install.
OK,well you don't say the type of vehicle,but a garage will charge a lot more than a local guy who does side jobs.ask around to find someone like that.you will save a lot.i work on cars all the time on the side and i usually charge about 50 dollars.
About $100 per axle. Call around for free quotes. May depend on if rotors need to be turned or maybe even replaced, if damaged.
150.00 for labor,hes nuts,my shop is 89.95,that includes machining the rotors,and hardware.
$150 is fair for labor and costs. Brake pads costs $25-35 and to turn the rotors another $20. So he is making less than $100 on the labor which is very dirty. If you go somewhere else, you will probably pay $200-250 but you will also have a warranty so weigh your options.
If you can change them or have a reliable friend, the pads are fairly cheap. (mine were 20 something for front)
Having them done by a professional, they won't change just the pads and all the rest adds up: turning drums/rotors, replacing bleeders, or whatever.
My brother just paid over $400 for his front brakes.
NOOO. That is not a good deal at all. Depending on where you live there is a place called Brake Team and they will do all your brakes for 100 bucks thats front and rear. For anyone that knows how to work on cars this is a 20 min job max. So 150 is outrageous.
That is way to much for an driveway mechanic to charge. I would pay him no more than $50-$75
iff pads only then 1 hr tops whole car. if machining req'd a lot more, pads std abt $25-30 NOT oem, competition grade a bit more, usually. You can buy a workshop manual and the tools to DIY for less than he's demanding. I'd consider him less than honest person, and be careful of him in all things from here on.
Around 75.00 to 125.00 an axle with brake pads included. Around 50 each to cut the rotors or drums, you would still have to pay for even if your friend does the work. If you need spring kit that will be another 20.00 dollars or so. No, that is to much to pay a friend or neighbor to do. On the street the going rate it about 50.00 an axle, but if he is a good friend he would do it for free. The brakes would be installed for about 200.00 to 300.00 at the local shop with the warranty. (FRIEND OR NEIGHBOR IT SHOULD BE FREE)
well sounds like he is also buying the beer for you guys tonight,yea that is a little much for a hour tops of labor.$50 to $75 is what i charge.and if you have to change the rotors he should not charge you anymore then $100 is the top.still is a little high tho.
midas charges about $160 for all 4 wheels and that includes the parts and labor as long as you don't need new rotors or rear brake drums.linux web hosting flavered nail polish
Its a small price to pay to help avoid an accident.
How much is it to get brake pads changed?
it depends, brake pads are usually cheap and labor is probably worth the same if not much...its cheap just go do it
How much is it to get brake pads changed?
Most places charge around 100 per axle. I recommend you ask a friend or family member. Pads cost around 25.00 a pair and they are easy to install.
OK,well you don't say the type of vehicle,but a garage will charge a lot more than a local guy who does side jobs.ask around to find someone like that.you will save a lot.i work on cars all the time on the side and i usually charge about 50 dollars.
About $100 per axle. Call around for free quotes. May depend on if rotors need to be turned or maybe even replaced, if damaged.
150.00 for labor,hes nuts,my shop is 89.95,that includes machining the rotors,and hardware.
$150 is fair for labor and costs. Brake pads costs $25-35 and to turn the rotors another $20. So he is making less than $100 on the labor which is very dirty. If you go somewhere else, you will probably pay $200-250 but you will also have a warranty so weigh your options.
If you can change them or have a reliable friend, the pads are fairly cheap. (mine were 20 something for front)
Having them done by a professional, they won't change just the pads and all the rest adds up: turning drums/rotors, replacing bleeders, or whatever.
My brother just paid over $400 for his front brakes.
NOOO. That is not a good deal at all. Depending on where you live there is a place called Brake Team and they will do all your brakes for 100 bucks thats front and rear. For anyone that knows how to work on cars this is a 20 min job max. So 150 is outrageous.
That is way to much for an driveway mechanic to charge. I would pay him no more than $50-$75
iff pads only then 1 hr tops whole car. if machining req'd a lot more, pads std abt $25-30 NOT oem, competition grade a bit more, usually. You can buy a workshop manual and the tools to DIY for less than he's demanding. I'd consider him less than honest person, and be careful of him in all things from here on.
Around 75.00 to 125.00 an axle with brake pads included. Around 50 each to cut the rotors or drums, you would still have to pay for even if your friend does the work. If you need spring kit that will be another 20.00 dollars or so. No, that is to much to pay a friend or neighbor to do. On the street the going rate it about 50.00 an axle, but if he is a good friend he would do it for free. The brakes would be installed for about 200.00 to 300.00 at the local shop with the warranty. (FRIEND OR NEIGHBOR IT SHOULD BE FREE)
well sounds like he is also buying the beer for you guys tonight,yea that is a little much for a hour tops of labor.$50 to $75 is what i charge.and if you have to change the rotors he should not charge you anymore then $100 is the top.still is a little high tho.
midas charges about $160 for all 4 wheels and that includes the parts and labor as long as you don't need new rotors or rear brake drums.
Subscribe to:
Posts
(Atom)